![]() ![]() Use 120 grit sandpaper or 80 grit sanding sponges.There is no need to remove all of the previous varnish and stain.Hand sanding all of this is certainly the worst part of the job, but you really just need to “rough-up” the surface. ![]() I recommend that the rails and balusters be sanded to achieve a proper bond. Therefore, they NEED to be as durable as possible. Handrails are probably one of the most trafficked surfaces in your home. Use a microfiber or tack cloth to remove any dirt, debris, and grime. teaspoon works very well, but other readily available cleaners work just as well. I detached the single handrail on the right wall because it was rather simple.Įven after a few years of use, the paint looks almost perfectly new! How to Paint Stair Railing and SpindlesĪs with any DIY project, preparation is key to success!įirst, everything should be cleaned thoroughly with a degreaser that won’t leave a film. This is why I recommend a good quality brush to minimize strokes. Note: It is too much work to pull out and reinstall stair rails and balusters, so I paint them with a brush. Wood Filler – Only for imperfections or filling old hardware.In fact, I often use takylon brushes from the craft store for detail work. Fine Paintbrushes – A fine furniture paint brush will give you the best finish.I don’t use original or any other brand although I have tried several. Stainblocking Primer – Premium or Adhesion is my never-failed-me-ever primer. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |